Every nut, bolt and washer a Gen 3 five link rear suspension needs, in one kit.
Two situations bring people here. You are rebuilding a rear end and would rather not reuse hardware that has already been through a few hundred impacts, or you are finishing one of our conversion kits and need the fasteners to assemble it.
Sold as a complete kit only — these are made up as sets and cannot be split.
What Is In The Kit
Covers every fastened joint in a stock configuration Gen 3 five link rear:
- Shock bolts, with nuts and washers
- Rear link bolts — frame side and axle side — with nuts and washers
- Rear panhard bar bolts, with nuts and washers
- Rear coil spring mount bolts, with nuts and washers
The product image shows generic hardware for illustration and is not a photograph of the actual kit contents.
Why Replace Rear Suspension Hardware
Suspension fasteners are not ordinary bolts. They are clamping a joint that moves under load, thousands of times, often with the whole weight of the truck arriving at once.
A bolt that has been torqued, loaded and backed off a few times has already given up some of its clamping ability, and a bolt hole that has been working slightly loose will not be obvious until something moves that should not. On a rear end you are taking apart anyway, fresh hardware is the cheapest insurance in the job.
It is also simply faster. Chasing individual fasteners across a parts counter costs more time than the kit costs money.
Fitment
For the Gen 3 and Gen 3.5 Ford F-150 Raptor five link rear suspension in stock configuration, model years 2021 through 2026 including the Raptor R.
Also the hardware kit for finishing one of our stock geometry Gen 3 rear suspension conversion kits.
Questions
Can I buy just part of the kit?
No. These are made up as complete sets, so we cannot separate them.
Does this fit a 2025 or 2026 Raptor?
Yes, 2021 through 2026 Gen 3 and Gen 3.5 trucks including the Raptor R, in stock rear configuration.
Will it work with a long travel rear?
This kit is cut for stock configuration. Long travel kits come with their own hardware — ask us if you are unsure what your build needs.
Do I need this with a conversion kit?
Our Gen 2 to Gen 3 conversion kit includes its own hardware. This listing is for a rebuild, or for topping up a build assembled from separate parts.
While You Have It Apart
- Billet rear trailing arms and panhard bar — the natural time to fit them is while the old ones are off
- Rear axle gusset kit and frame mount gusset kit
- Rear bump stop kit and rear limit strap kit
The full catalog is on Gen 3 Raptor Rear Suspension.