2010-2014 Gen 1 Raptor Front Limit Strap & Bump Stop Kit - Stock Lower A-Arm

• Adds a Fox, King, ADS or Carbon bump stop to the front stock suspension (2.5" OD × 2.5" travel bump stop for complete bottom-out protection)
• Works with factory stock lower a-arm and bolts directly to the cast aluminum arm
• The Limit Strap prevents top-out and saves your shock from premature failure
• Extends the life of front suspension components
• Limits droop travel so you don't rely solely on the shock to stop extension
• Must-have if you're running aftermarket springs on your Raptor
• Purpose-built for Gen 1 Raptor (2010–2014)

• Heavy-duty 12" straps made from premium materials withstand the toughest off-road abuse
• Each strap is constructed with 4 layers of military-grade webbing
• Black-plated steel mounting tabs resist corrosion and deliver lasting strength
• Unlike cheap alternatives, our straps will not stretch out or wear prematurely

• Integrated bump stop pad makes adding a front bump stop kit simple
• Brackets secure around the front of the stock lower control arm
• MIG-welded in-house and finished with a hammer black powder coat for strength and durability

• Welding the bump stop mount to the frame is required
• Should only be installed by a qualified welder/fabricator
• May not be compatible with Race Series front shocks or remote reservoir shocks that require frame-mounted hardware. This depends on your hose routing to clear the bump stop and limit strap

• (2) 12" Limit Straps
• (2) Bump Stop Can Mounts
• (2) 2.5" OD × 2.5" Travel Bump Stops
• (2) Main Mounting Brackets
• (2) Mounting Bracket Backing Plates

Lower Control Arm Mounting Bracket Hardware

• (10) 3/8-16 × 1-1/4" Bolts
• (10) 3/8-16 Nylock Nuts
• (6) 3/8 Washers

Lower Strap Mounting Bracket Hardware

• (2) 1/2-20 Nylock Nuts
• (2) 1/2-20 Shallow Nylock Nuts
• (2) 1/2-20 12-Point Bolts
• (4) 1/2 Washers

Upper Strap Mounting Bracket Hardware

• (2) 1/2-13 × 1-1/2" Bolts
• (2) 1/2-13 Nylock Nuts
• (4) 1/2 Washers