Unlock the full potential of your Gen 1 Raptor (2010–2014) with our front limit strap and bump stop kit. Designed to work with the factory stock lower a-arm, this kit bolts directly to the cast aluminum arm for straightforward installation.
Features & Benefits
- Adds a Fox, King, ADS or Carbon bump stop to the front stock suspension (2.5" OD × 2.5" travel bump stop for complete bottom-out protection)
- Works with factory stock lower a-arm and bolts directly to the cast aluminum arm
- The Limit Strap prevents top-out and saves your shock from premature failure
- Extends the life of front suspension components
- Limits droop travel so you don't rely solely on the shock to stop extension
- Must-have if you're running aftermarket springs on your Raptor
- Purpose-built for Gen 1 Raptor (2010–2014)
Straps Built for Durability & Strength
- Heavy-duty 12" straps made from premium materials withstand the toughest off-road abuse
- Each strap is constructed with 4 layers of military-grade webbing
- Black-plated steel mounting tabs resist corrosion and deliver lasting strength
- Unlike cheap alternatives, our straps will not stretch out or wear prematurely
Mounting Brackets with Built-In Bump Stop Pad
- Integrated bump stop pad makes adding a front bump stop kit simple
- Brackets secure around the front of the stock lower control arm
- MIG-welded in-house and finished with a hammer black powder coat for strength and durability
⚠️ Installation Notice
- Welding the bump stop mount to the frame is required
- Should only be installed by a qualified welder/fabricator
- May not be compatible with Race Series front shocks or remote reservoir shocks that require frame-mounted hardware. This depends on your hose routing to clear the bump stop and limit strap
Kit Includes
- (2) 12" Limit Straps
- (2) Bump Stop Can Mounts
- (2) 2.5" OD × 2.5" Travel Bump Stops
- (2) Main Mounting Brackets
- (2) Mounting Bracket Backing Plates
Lower Control Arm Mounting Bracket Hardware
- (10) 3/8-16 × 1-1/4" Bolts
- (10) 3/8-16 Nylock Nuts
- (6) 3/8 Washers
Lower Strap Mounting Bracket Hardware
- (2) 1/2-20 Nylock Nuts
- (2) 1/2-20 Shallow Nylock Nuts
- (2) 1/2-20 12-Point Bolts
- (4) 1/2 Washers
Upper Strap Mounting Bracket Hardware
- (2) 1/2-13 × 1-1/2" Bolts
- (2) 1/2-13 Nylock Nuts
- (4) 1/2 Washers
Questions
Which trucks does this kit fit?
The 2010-2014 Gen 1 Ford Raptor running the factory (stock) lower control arms.
Does it work with the stock lower control arm?
Yes. It is designed for the factory lower arm, and the brackets bolt directly to the cast aluminum arm and secure around its front.
Why do I need front limit straps?
The limit strap stops top-out and limits droop travel, so you are not relying only on the shock to stop extension. That saves the shock from premature failure and extends the life of the front suspension. It is a must-have if you are running aftermarket springs.
What bump stop does it use?
The kit includes 2.5" OD by 2.5" travel bump stops for bottom-out protection, and the mount takes a Fox, King, ADS or Carbon bump stop.
How strong are the straps?
They are heavy-duty 12" straps built from 4 layers of military-grade webbing with black-plated steel mounting tabs, and they will not stretch out or wear prematurely.
Does installation require welding?
Yes. The bump stop mount has to be welded to the frame, so the kit should only be installed by a qualified welder or fabricator.
Will it work with Race Series or remote reservoir shocks?
It may not. Race Series front shocks and remote reservoir shocks that need frame-mounted hardware can conflict, depending on whether the hose routing clears the bump stop and limit strap.